News & Events
Industry News
| How to install LED display screen for indoor outdoor led wall | ||||
| The development trend of LED display screen in recent years makes outdoor display screen dominated by LED display screen. This is because LED display screen is energy-saving, good display effect and long service life, so it has been greatly recognized by users. But how to install such a large display screen? Let's take a look at how to install the LED display and how to install it! How to install the LED display screen? Take a look at the installation steps of LED display  1： Frame splicing assembling the outer frame of LED display screen, that is, splicing the cut profiles. There are mainly square and round profiles in the market, but the assembly method is the same. 2： Fixed unit board 1. Place the unit board in the frame (pay attention to the front and back sides of the frame, and the grooved side is the front side). At this time, the installation position of the backing strip must be quite accurate, or it must be reinstalled from the beginning. 2. After the back strip is fixed, the frame can be removed and the magnet can be installed. 3. After the magnet is installed, close the frame, let the magnet and the back strip absorb, and the fixation of the unit plate is completed. 3： Connect the flat cable and the upper and lower power cables 4： Fixed power supply and control card pay attention to the positive and negative poles when connecting the power supply and the unit board. It is recommended to use svv2*1.0 soft core wire, that is, 1 square double stranded soft core wire. 5： Control card and unit board cable connection What are the installation methods of LED display: 1. Wall mounted installation: the most common installation method is mostly applicable to the installation of indoor LED display screen and door head screen. Generally, the display screen has a small area, but the wall is required to be a solid wall, and the hollow wall, glass wall, curtain wall, etc. cannot bear it. Therefore, this kind of installation method is not suitable. 2. Column type installation: it is a common outdoor installation method, which is mostly used for the installation of large outdoor advertising screens. Such displays generally require wide vision and long viewing distance, such as squares, parks, etc. Single column and double column installation can be used according to the screen area of the display screen; The installation method is to place the column on the open space, and then install the display screen on the column. In addition to welding the steel structure of the screen, the column installation also requires concrete or steel columns, and considers the foundation conditions of the foundation and whether there is a typhoon. 3. Stacking: it means that a wall sufficient to support the whole LED display screen is built on the ground with concrete structure, and the steel structure is welded on the wall to fix the display screen, paying attention to the reserved maintenance space. 4. Inlay installation: it has the advantages of beautiful appearance and no bulge. It is generally used indoors. It is suitable for indoor LED display screens with small area. First, dig holes of the same size on the wall according to the size of the screen, and then embed the screen into the wall as a whole. Note: the wall is required to be a solid wall. If it is installed outdoors, the display space needs to be reserved in advance during the construction of the project. The display board can also be made during the actual installation, and the steel structure is embedded in the building wall. 5. Hanging installation: it is mostly suitable for large places such as roads, stations, airports and so on to play the role of indicator signs. Generally, the screen area of the display screen is required to be small. Roof type installation: it is mainly used for outdoor LED billboards, which are generally installed on the roof, but wind, water and lightning protection shall be considered as the building height increases |
||||
|
||||
